Cap Duct Replacement; Cap Duct Motor Replacement; Ice Corner Door Replacement - Kenmore 795.72033 Service Manual

Appliantology.org

3-13 CAP DUCT REPLACEMENT

1) Pull up and out on the dispenser cover to remove.
2) Disconnect the wire harness.
3) Remove the funnel.
4) Replace in reverse order.

3-14 CAP DUCT MOTOR REPLACEMENT

1) Separate the Housing of the Cap Duct Motor.
2) Unscrew 3 screws to disassemble the motor.
3) When replacing to a new Motor, always check position of
the Duct Door and Link to install the Motor.
Duct Door
Link
Cap Duct Motor
4) Assemble on the screws.
5) Contract the Housing.

3-15 ICE CORNER DOOR REPLACEMENT

1) Loosen the front screw as shown in the picture.
2) Lift up the hinge with one hand.
3) Pull out the Ice Corner Door with the other hand.
hinge
- 11 -