Lamp; Multi Duct; Main Pwb - Kenmore 795.72033 Service Manual

Appliantology.org

3-6 LAMP

Unplug Refrigerator, or disconnect power at the circuit
breaker.
If necessary, remove top shelf or shelves.
3-6-1 Refrigerator Compartment Lamp
1) Release 2 screws.
2) Hold both ends with your both hands and pull it
downward to remove it.
3) Use a flat tool as shown below to remove the cover
lamp.
4) As shown below, use a flat tool to remove the cover
lamp.
LED, Assembly
Cover, Lamp
3-6-2 Freezer Compartment Lamp
1. Unplug refrigerator power cord from outlet.
2. Remove screw with driver.
3. Grasp the cover Lamp, pull the cover downward.

3-7 MULTI DUCT

1. Remove the upper and
lower Caps by using a
flat screwdriver, and
remove 2 screws.
(Figure 6)
2. Disconnect the lead wire
on the bottom position.

3-8 MAIN PWB

1) Loosen 3 screws on the PWB cover.
2) Remove the PWB cover
Case Lamp
3) Disconnect wire harness and replace the main PWB in
the reverse order of removal.
- 9 -
Figure 6