Load And Apply The Setting Value; Control Multi-Projectors At The Same Time - Sanyo PJ-Net Organizer POA-PN01 Owner's Manual

Pj-net organizer model no. poa-pn01 owner's manual

Hide thumbs Also See for PJ-Net Organizer POA-PN01:

Table of Contents

Controlling the Multi-Projectors

Load and apply the setting value

The control sets saved for each projector (p. 46) can be used while the multi-con-

trolled projectors function is being used. Select a setting number from the item Load

Setting No. with the popup menu button and then press the Set button. The control

values stored with selected set number for each projector will be applied to the indi-

vidual projector assigned to that set. The control values will not be applied to all of

the projectors under multi-control.

The valid controls are shown below. Please refer to chapter "Control the Projector" on

page 33 for further control and description. When the control button or setting button

is pressed, the registered projectors for the multi-control are controlled at the same

time.

Table of Contents

Poa-pn01