Exclude/Add The Projectors From/Into The Multi-Control; Add All Of Listed Projectors Into Multi-Control; Delete From The Multi-Control List - Sanyo PJ-Net Organizer POA-PN01 Owner's Manual

[Note]
*1 If the JavaScript setting of the web browser is set "JavaScript Disable", The registered pro-
jector name will not be listed on the Change a Projector" sub menu, Please change the
JavaScript setting. See chapter "Web browser setting/Active Script (JavaScript enable)" on
page 64 for further instructions.
* If you do not use the projector name, a word "None" will be displayed in the Name column.

Exclude/Add the projectors from/into the multi-control

To add or exclude projectors from multi-control, check or uncheck the "Control" check
boxes for your desired projectors and then press the Set button. The gray back-
ground color shows that the projector is excluded from multi-control.
check if
adding into
the multi-
control

Add all of listed projectors into multi-control

To add all of listed projectors into the multi-control, press the Add All button. The
status of the registered projectors are indicated on the column "Status". For further
description of "Status" , see page 53.
Press the
Add All but-
ton to add all
of projectors.

Delete from the multi-control list

To delete the registered projector from the multi-control list, press the Delete button.
If you not register the projector name, the word "None" is displayed on the projector name
column.
You can register the projectors up to 100 sets for the multi-control.
Press the Set but-
ton to adding into
the multi-control.
Press the Delete
button to delete
from the multi-
control list.
Multi-control
51
PJ-Net Organizer
OWNER'S MANUAL