Page 1
HD&SD-SDI MODULE CARD POA-MD17SDID INSTRUCTIONS MANUAL This module card can be used to display the date which is converted a HD-SDI signal (HD Serial Digital Interface Signal) conforming to the BTA S-004 SMPTE292M standard or the SD(D1)-SDI signal (SD Serial Digital Component Signal) conforming to the SMPTE259M-C standard into a RGB parallel digital signal.
Page 2
■ Available signal format SMPTE259M-C Standard 480-60i (60/59.94Hz) SMPTE259M-C Standard 575-50i (50Hz) SMPTE260M Standard 1035-60i (60/59.94Hz) SMPTE274M Standard 1080-60i (60/59.94Hz) SMPTE296M Standard 720-60p (60/59.94Hz) SMPTE274M Standard 1080-24psf (24/23.97Hz) SMPTE274M Standard 1080-24p (24/23.97Hz) SMPTE274M Standard 1080-25psf (25/24.97Hz) SMPTE274M Standard 1080-25p (24/24.97Hz) SMPTE274M Standard 1080-30psf (30/29.97Hz) SMPTE274M Standard 1080-30p (30/29.97Hz) SMPTE274M Standard 1080-50p (50Hz)
Page 3
■ Setup the Module card This module card connects to the terminal slot of the LCD projector. 1. First, remove a terminal equipped with a slot for setup. Remove 2 screws and pull out the terminal from the projector. 2. Put a HD&SD-SDI module card in along the guide, and push in the projector. Connect the socket of module card in the terminal socket of the projector firmly.
Page 4
■ Connection Connect a cable of BNC signal to the SDI-IN 1 or SDI-IN 2. Connect the SDI-OUT to other monitor or other projector equipped with HD-SDI or SD-SDI module card. SDI IN 2 SDI OUT SDI IN 1 Connect to a signal source. Connect to the monitor or (HD-SDI or SD-SDI signal) other projector which is...