Network Configuration; Owner's Manual - Sanyo PJ-Net Organizer POA-PN01 Owner's Manual

Pj-net organizer model no. poa-pn01 owner's manual
Hide thumbs Also See for PJ-Net Organizer POA-PN01:
Table of Contents

Advertisement

[4] Network configuration

When you connect a projector to a network, the network number of projector must
be the same as the network you intend to connect. You should configure projector's
network first. Make sure that the projector is connected to the network correctly.
There are 2 ways to configure the network, by using the projector's menu
using the computer
[B]
Procedure of Connecting the projector to the network
Configure the network with the
A
projector
Turn the projector on and
display the network setting
menu on the screen.
Configure the network through
the projector's menu.
Example of projector's configuration
IP Address : 192.200.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.200.1.1
DNS : 0.0.0.0
Restart the PJ-Net Organizer
Please see further
informatin on pages
16-17.
. Refer to the chart below and use the method you prefer.
B
p.16
Temporarily set up the computer's
network with the default network
number of the PJ-Net Organizer.
Restart the Computer, if required
Using the web browser and login to
the setting page of the PJ-Net
Organizer by accessing the default
IP address.
Change the network address you
want to connect to the existing
network through the setting menu
on the browser.
Restart the PJ-Net Organizer
Completing the network configuration. Perform the
basic setting and operation of the projector by using
the web browser. Please see chapter "Basic Setting"
on page 25 for further information.
Configure the network with computer
Reset to the computer's original
network configuration.
Network configuration
, or by
[A]
p.18
Please see further
informatin on pages
18-23.
Example of projector's configuration
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway : (blank)
DNS : (blank)
Please see further
informatin on pages
25-30.
Default Network Address of the PJ-
NetOrganizer
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Example of projector's configuration
IP Address : 192.200.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.200.1.1
DNS : 0.0.0.0
PJ-Net Organizer

OWNER'S MANUAL

15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poa-pn01

Table of Contents