Cancel The Timer - Sanyo PJ-Net Organizer POA-PN01 Owner's Manual

Pj-net organizer model no. poa-pn01 owner's manual
Hide thumbs Also See for PJ-Net Organizer POA-PN01:
Table of Contents

Advertisement

Controlling the Projector
Getting the current time
The displayed time is the value set when the setting page was displayed. This time
value is not updated automatically. To update the display time press the Refresh but-
ton.
Notes on timer setting
Up to 10 timer events can be registered. Timer events always operate according to
the next valid event depending on the projector's power status. In the example
below, event 3 turns on the projector so next event 4 (also turning on projector)
will not be effective because the projector is already turned on. Similarly, when the
projector is turned off by event 5, event 6 OFF will not be effective in turning it off
again. But these secondary events (event 4 and event 6) will become effective if a
person turns off the projector (after event 3 and before event 4) or turns on the
projector (after event 5 and before event 6).
Projector Power
When the timer events are set at the same time, the last event set will override
the previous events. For example, if there is an event like "On at 8:00 everyday"
and then new event is set like "Off at 8:00 everyday", only the last setting event is
effective.
When the timer event ON occurs during cooling down period, this is invalid event
because of the projector cannot be turned on during this cooling down period.

Cancel the timer

To cancel the timer event press the Delete button next to the event you wish to
delete. Please confirm that the event is deleted from the list.
The timer operates by using the clock function provided in this product. Before setting the
timer, please confirm that the current date and time are set correctly. Timer and clock func-
tions are functioning using a lithium battery provided in this product. When the battery runs
down, the clock and timer functions will not operate correctly. Consult your local dealer for
the replacement of battery. The replacement must be carried out by a qualified service per-
sonnel.
44
ON
Event 1
ON
Event 2
Event 3
Event 4
Event 5
Event 6
Time
Invalid event
ON
OFF
ON
ON
OFF
Invalid event
OFF

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poa-pn01

Table of Contents