Login Or Logout The Setting Page Of The Projector; Enter The Ip Address; Login - Sanyo PJ-Net Organizer POA-PN01 Owner's Manual

Pj-net organizer model no. poa-pn01 owner's manual

Hide thumbs Also See for PJ-Net Organizer POA-PN01:

Table of Contents

Basic Setting and Operation

This chapter describes basic operations and settings for controlling the projector via a

network using this product. It is required that computer and projector are connected

to the network and the network address be properly configured.

Login or logout the setting page of the projector

Launch the web browser installed in

your computer, enter the IP address into

the "Address" on the browser and the

press the "Enter" key.

Enter the IP address that you configured in chapter "Network Configuration" on page 15. The

default IP address is [192.168.0.2].

The following login page appears on the browser. Type the password and press the

Enter button. If you check the item "Save this password", you will automatically

[Note]

When accessing projector at first time or setting the no password [0000], the auto-login will

be performed and the next main setting page is displayed.

The function of "Save this password" uses the cookies function and JavaScript function of the

web browser. If you cannot automatically login even if the "Save this password " is checked,

check your browser preference and change setting to "Accept all cookies" and "JavaScript

Enable" if required. Please see chapter "Appendix: Web browser setting/Cookies enable,

Active Script (JavaScript enable)" on page 64 for further information.

Table of Contents

Poa-pn01