Product Specification - Sanyo PJ-Net Organizer POA-PN01 Owner's Manual

Pj-net organizer model no. poa-pn01 owner's manual
Hide thumbs Also See for PJ-Net Organizer POA-PN01:
Table of Contents

Advertisement

Product specification

Type ......................................PJ-Net Organizer
LAN interface ........................Applicant regulation IEEE802.3 (10Base-T)
Network protocol
Serial interface
Power source ........................Supplied from the projector
Power consumption ..............3.0 watts
Dimensions (W x H x D)........4.2" x 1.1" x 5.28" (105 x 27.5 x 132mm)
Weight ..................................0.54 lbs (245 g)
Built-in battery ......................Lithium battery, Type CR2032, 3.0V
Operating temperature..........41˚F ~ 95 ˚F (5˚C ~ 35 ˚C)
Storage temperature ............14˚F ~ 140˚F (-10˚C ~ 60˚C)
* The specifications are subject to change without notice.
Data transfer speed
data transfer mode
Terminal
TCP/IP specification
RS-232C
Baud rate
0.3/1.2/2.4/4.8/9.6/19.2/28.8/57.6/115.2 Kbps
Flow control
Hardware flow control (RTS/CTS, Xon/Xoff)
Parity check
Odd/Even
Terminal
D sub 9-pin Male
IEEE802.3u (100Base-TX)
10Mbps/100Mbps
Half duplex/Full Duplex
8-pin modular (RJ-45)
TCP/IP
Specifications
73
PJ-Net Organizer
OWNER'S MANUAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poa-pn01

Table of Contents