Step 6: Perform A Quality Control; Stopping - AGFA 5400/516 User Manual

Step 6: perform a quality control

At the NX workstation:
1. Select the image on which quality control is to be performed.
2. Prepare the image for diagnosis by using e.g. L/R markers or annotations.
3. If the image is OK, send the image to a hardcopy printer and/or PACS
(Picture Archiving and Communication System).

Stopping

1. Switch off the DR Generator Sync Box.
2. Stop NX.
For detailed information about stopping NX, refer to the NX User Manual,
document 4420.
3. Switch off the DR Detector.
For detailed information about switching off the DR Detector, refer to the
DR Detector user manual.
DR Generator Sync Box, DR Retrofit Solution | Getting started | 45
0319D EN 20191031 1011