Table of Contents
Advertisement
Starting
1. Power on the DR Detector.
For detailed information about powering on the DR Detector, refer to the
DR Detector user manual.
2. Start NX.
For detailed information about starting up NX, refer to the NX User
Manual, document 4420.
The NX application and the software console are available on the NX
workstation.
3. Power on the DR Generator Sync Box.
Basic Workflow
This section describes the workflow which will be followed when using the
system for acquiring radiographic images.
Topics:
•
Step 1: retrieve the patient info
•
Step 2: select the exposure
•
Step 3: prepare the exposure
•
Step 4: check the exposure settings
•
Step 5: execute the exposure
•
Step 6: perform a quality control
DR Generator Sync Box, DR Retrofit Solution | Getting started | 39
0319D EN 20191031 1011
Advertisement
Table of Contents
