Picture Screen Adjustment - Sanyo PLC-XU20E Owner's Manual

COMPUTER MODE
This projector has a picture screen resize function, which enables you to display the image in desirable size.
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN
box PICTURE SCREEN Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the function that you want to select
and then press SELECT button.
True
To turn the image into its original size select True in the dialog box.
When the original image size is larger than the screen size (1024 x
768), this projector becomes Digital Zoom mode automatically.
Keystone
When the image is distorted vertically, select Keystone in the dialog
box. The ON-SCREEN menu and SCREEN ADJUST menu
disappears and the message "Keystone" is displayed. Correct the
Keystone distortion by pressing the KEYSTONE
POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT
on page 20.
Digital Zoom
To adjust the image size or pan the image, select Digital zoom in
the dialog box. The ON-SCREEN menu and SCREEN ADJUST
menu disappears and the message "D. Zoom" is displayed.
This projector is also turned into Digital Zoom mode by pressing
the D.ZOOM /
Refer to the following for operation.
Expand function
To expand the image size, press the D.ZOOM
Compress function
To compress the image size, press the D.ZOOM
degrees.
Panning function
To pan the image, press the POINT UP/DOWN/LEFT/RIGHT buttons. Panning function can work only when the image
is larger than the screen size.
To cancel Digital Zoom mode, press the any buttons except D.ZOOM
button. To adjust the image to the screen size (1024 x 768), press NORMAL button.
This projector cannot display in the resolution higher than 1280 X 1024. If your computer's screen resolution is
higher than 1280 X 1024, reset the resolution to the lower before connecting the projector.
The image data in other than XGA (1024 x 768) is modified to fit the screen size in the initial mode.
The normal "Panning Operation" may not function properly if the computer system prepared with the "PC Adjust" is
used.
28

PICTURE SCREEN ADJUSTMENT

and press the SELECT button. Another dialog
button on the Remote Control Unit.
/ button or the
button or the SELECT button. The image is magnified by degrees.
button or the RIGHT CLICK button. The size of image is reduced by
/ , SELECT, RIGHT CLICK, POINT or LASER
Move the arrow to the
function and press the
SELECT button.