Sodex Sport S80105 Maintenance Manual

Sodex Sport S80105 Maintenance Manual

Parallel bars

Advertisement

DESCRIPTION

Steel structure ф90
Plastified
CONFORM
European norm
NF EN 16630
The equipement has to be regularly maintained by the owner. If one of the modules has to be repaired,
users should not be able to access to it until the repair is done. To ensure good use, routine visual ins-
pections are required, paying special attention to the following points: The cleanliness, ground clearance,
surface condition, visible foundations, sharp edges , missing parts, excessive wear of moving parts and
the structural integrity. Moreover, a more thourough functional check should be carried out every two
months on the following points:
- Check that all the screws are correctly tightened
- Remove all the non expected elements (ex: stickers, clothes, ropes,...)
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-
rer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Check that all the instruction labels stuck on the modules are in condition and are readable. Replace
them if necessary.
- Check the stability of the modules. If one of them is sligthly unfixed from the foundation,
- Check that all the anchors are secure in the ground.
- Clean all dirty parts with soapy water.
Every year, it is recommended to check carefully the ground fixation. In order to do this, remove the dirt
covering the attachment plate, and inspect cautiously the wear of the fixations and of the concrete. Re-
place them if necessary. Check that the screws are firmly tightened.
Note : If the screws untighten too easily, do not hesitate to use Loctite !
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to
be done within the legal period of the reception of the material. The warranty will not apply to:
-
all degradation during the transport.
-
all degradation due to use differing from which was intended.
-
all degradation due to poor maintenance.
-
any defect claimed after the end of the legal period.
THIS PRODUCT HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH AND EUROPEAN STANDARD EN-NF 16630
PRODUCT SHEET
PRODUCT REF
MAINTENANCE

WARRANTY

PARALLEL BARS
S80105
:
UNIT
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S80105 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sodex Sport S80105

  • Page 1 PRODUCT SHEET PARALLEL BARS UNIT S80105 PRODUCT REF DESCRIPTION Steel structure ф90 Plastified CONFORM European norm NF EN 16630 MAINTENANCE The equipement has to be regularly maintained by the owner. If one of the modules has to be repaired, users should not be able to access to it until the repair is done. To ensure good use, routine visual ins-...
  • Page 2 TECHNICAL DETAILS AND DRAWINGS Exercise space and evolution space Dimensions Height of free fall: 400 mm Evolution zone area: 15 m²...
  • Page 3 USER MANUAL Precautions: - Not recommended for people with back issues - Pratice it with a reasonnable rythm to avoid any injuries - Only one person at a time Advantages: This module is ideal: - to reinforce yourshoulders, back and chest muscles Example: Maintain your body on the air thanks to the han-...
  • Page 4 FIXATION & SEALING NECESSARY TOOLS (NOT INCLUDED) Wrench 22 Shovel INCLUDED ITEMS NB: All the dimensions are in millimeter X*: Distance between holes WARNING : X has to be measured on site, on each module (an identical reference may have a different hole spacing). Dig 2 holes for the concrete according to the drawing above.
  • Page 5 FIXATION & SEALING - Assemble the attachment plate as follow: - Pour concrete (EN 206-1), and stop when you are 25cm under the surface. - Insert the attachment plates into the concrete, ensuring they are settled horizontally. Let the concrete set during 3 or 4 days. NECESSARY ITEMS...
  • Page 6 FIXATION & SEALING Remove the nuts and the washers from the at- tachment plates. Mount the equipment onto the attachment plate and fix them together thanks to the fixing kit already used. Fill the gap with dirt, then cover. NECESSARY ITEMS...
  • Page 7 PACKING LIST FITNESS PARALLEL BARS PRODUCT REF S80105 Index B UNIT NOMENCLATURE Package Weight Dim. Index Designation Description Quantity Packing Method N° (kg) (mm) Plastic 2000x600x27 S80105-01 Left arm bubbles+cardb oard 5 layers Plastic 2000x600x27 S80105-02 Right arm bubbles+cardb oard 5 layers...

Table of Contents