1.3 Thermal insulation ..........................1.4 Packaging ............................2 General Information ............................3 Technical Data and Dimensions of HSK 350 K P-B Thermal Store ............4 Operation ............................... 5 Connection of HSK 350 K P-B to a Heating System ................. 6 Installation and Commissioning ........................
1 - Description The HSK 350 K P-B Combination Thermal Store with an integrated stainless-steel heat exchanger and a tight separating metal plate is intended for storing heat and heating of domestic hot water. Thanks to the modified construction and the tight separating plate, it is sufficient to use only one zone valve for switching between heating the upper and lower part of the tank.
3 - Technical Data and Dimensions of HSK 350 K P-B Thermal Store Main Features Combination thermal store with integrated stainless-steel heat exchanger and a tight separating metal sheet is intended for heat accumulation and DHW heating. Thanks to its modified...
Dimensions pos. description connection height [mm] Heat sources Incoming from heat source G 1“ F 1390 Return to heat source G 1“ F 1630 Incoming from heat source G 1“ F 1170 Heating system Flow to heating system G 1“ F 1530 Return from heating system G 1“...
6 - Installation and Commissioning Installation must meet valid rules and may be done only by qualified staff. Defects caused by improper installation, use or handling are not covered by warranty. After the tank is installed and connected to an existing heating system, it is recommended to clean the entire heating system using a suitable cleaning agent, e.g.
Need help?
Do you have a question about the HSK 350 K P-B and is the answer not in the manual?
Questions and answers