Web Camera Function - Canon EOS R5C Advanced User's Manual

Web Camera Function

Web Camera Function
You can connect the camera to a computer using an interface cable, and use the camera as a web camera (with
compatible software). Only video can be recorded while using this function. For more details about supported
120
operative systems or software tested for use with the camera, visit your local Canon website. For more details,
refer to the computer's instruction manual.
When connecting the camera to a computer, use the included interface cable or a Canon cable.
When connecting an interface cable, also use the included cable protector. Using the cable protector helps
prevent accidental disconnection and terminal damage.
For details on the cable protector, refer to the Advanced User Guide (PHOTO edition).
Video output configuration
7680x4320, 3840x2160, 1920x1080, 1280x720
8192x4320, 5952x3140, 4096x2160, 2976x1570, 2048x1080
1 Select
2 Connect the camera to a computer.
3 Open the desired compatible software on the computer.
4 When the connection ends, disconnect the interface cable from the camera.
NOTES NOTES
• This function cannot be used simultaneously with the Browser Remote function (A 177), while shooting
photos or during IP streaming.
Main resolution
B
> [ System Setup] > [USB Mode] > [Video Output (UVC)].
USB terminal
Interface cable
Video format Resolution
1024x576
Motion JPEG
1088×576
Computer
Frame rate
30 fps (maximum)