Canon EOS R5C Advanced User's Manual page 195

Menu item
[Ctrl Dial in Menus]
[Focus Ring Operation]
[Focus Ring Direction]
[Focus Ring Response]
[Keep Key Lock at Shutdown]
[Key Lock]
[REC Button]
[Assign. Button 10 as REC],
[Assign. Button 13 as REC]
[Onscreen REC/STBY Button]
[Touch Screen Response]
[Tally Lamp],
[Card Access LED]
[Fan Mode]
[Fan Speed (STBY)]
[Fan Speed (REC)],
[Fan Speed (Always)], [Fan Speed]
[Review Recording]
2
[GPS Auto Time]
[USB Mode]
[Retract Lens]
[Shutter at Shut Down]
Setting options and additional information
[Disable], [Enable]
Enables or disables the use of the front and top control dials to navigate the setup menus, direct touch
control, direct setting mode and status screens.
[Enable During AF], [Disable During AF]
[Reverse], [Normal]
Changes the direction of the adjustment when operating the focus ring on an RF lens.
[Varies with Rotation Speed], [Linked to Rotation Degree]
[On], [Off]
[All Buttons], [All Except REC Button]
[Disable], [Enable]
Enables or disables the use of the REC buttons.
[On], [Off]
This setting turns assignable button 10/13 to an alternative REC button.
[On], [Off]
When this setting is set to [On], the recording operation indicator (REC/STBY) on the CAMERA mode
screen becomes an onscreen button you can touch to start/stop recording.
[Normal], [Low]
[On], [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Tally Lamp]: The tally lamp (A 12) when the camera starts up and while recording.
[Card Access LED]: The card access indicator (A 34) when the camera is accessing the card.
[Automatic], [Always On]
[Maximum], [High], [Middle], [Low]
[High], [Middle], [Low]
[Entire Clip], [Last 4 sec]
[On], [Off]
When this setting is set to [On], the camera automatically adjust its date and time settings according to
the information received from the GPS signal.
• While the automatic date/time adjustment is activated, the
Time] setting will not be available.
• The time will not be updated while recording video.
[Video Output (UVC)], [Canon App(s) for iPhone], [PTP Connection/GP-E2]
Select [PTP Connection/GP-E2] when connecting the GP-E2 GPS Receiver to the camera's accessory
shoe.
[On], [Off]
When a compatible lens (A 235) is attached to the camera and the focus mode switch on the lens is set
to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.
When this setting is set to [On], turning off the camera will move the focus position. To prevent this, set
this setting to [Off]. Note that there is no guarantee that the focus position will not move, so checking the
focus position is recommended when turning on the camera.
[Close], [Open]
This setting allows you to choose whether the shutter closes or remains open when the power switch is
set to OFF.
• The [Close] setting is recommended during normal use in order to protect the camera's sensor from
dust or dirt when changing lenses.
• Select the [Open] setting when you want to reduce the sound caused by setting the power switch from
VIDEO to OFF or from OFF to VIDEO.
Menu Options
(A 22)
(A 25)
(A 25)
(A 47)
(A 121)
(A 47)
(A 19)
(A 43)
(A 55)
> [B System Setup] > [Date/
(A 120)
195