Camera's Settings Page From The Web Browser - Canon CR-N500 Settings Manual

Camera's Settings Page from the Web Browser

Able to access the camera by directly specifying the IP address from a web browser.
If there is an IP address assigned by the DHCP server, specify it, otherwise specify "192.168.100.1".
Important
• Able to access with the IP address of 192.168.100.1 approximately 2 minutes after connecting the camera to the network environment.
• If an IPv4 address is assigned by the DHCP server, it will switch to that address and access by 192.168.100.1 will not be possible.
• If there are devices with 192.168.100.1 on the same network, the same IP address will be assigned, and access to the camera with
192.168.100.1 will not be possible.
When accessing with 192.168.100.1., set the IP address of the computer.
1
Set the IP address of the computer to the same network as 192.168.100.1 such as 192.168.100.xxx.
Launch the web browser.
2
Enter the camera's IP address in the address column of the web browser and press [Enter].
3
The [Default Settings (1/2)] screen of the camera is displayed.
Perform steps 4 to 5 of the previous section "Settings for the Camera Search Tool".
4
After the camera reboots, the Settings Page is displayed and settings are able to be configured.
Note
If necessary, restore the computer settings changed in step 1.
16