Canon EOS R5C Advanced User's Manual page 147

Connecting to an External Monitor or Recorder
When you connect the camera to an external device, be it a monitor (to monitor the recording or for playback) or
an external video recorder (for recording), adjust the required settings in the menu. For details about output
signals, refer to Video Output Configuration (A 145).
Connection diagram
HDMI cable (commercially available)
NOTES
• It is recommended to use the supplied cable protector when connecting a commercially available HDMI cable
to the camera. For details on the cable protector, refer to the Advanced User Guide (PHOTO edition).
• Powering the camera from a power outlet using the DC coupler and an AC adapter is recommended.
Using the HDMI OUT Terminal
The digital signal that is output from the HDMI
can output also the time code signal, recording command and various assistance displays (onscreen displays,
markers, etc.) in order to check them also on an external monitor.
1 Connect the HDMI cable to the HDMI OUT terminal.
B
2 Select > [ System Setup] > [HDMI Output Signal] > Desired option.
3 To output the time code signal, select
[On].
NOTES
• You can set > [B System Setup] > [Linked to HDMI Monitor] to [On] to automatically change the HDMI
OUT terminal's output resolution according to the capabilities of the connected monitor. When this setting is
set to [Off], the output resolution is set according to the menu settings and if the connected monitor is not
compatible with the signal output from the camera, HDMI output will stop.
• The HDMI OUT terminal is for output only. Do not connect the camera to another device's output terminal
using the HDMI OUT terminal as this will cause a malfunction.
• Correct operation cannot be guaranteed when connecting the camera to DVI monitors.
• If the camera's time code is being output and
to [On], you can use the camera's REC button to control also the recording operation of an external recorder
connected to the HDMI OUT terminal.
Connecting to an External Monitor or Recorder
HDMI OUT terminal
TM
OUT terminal includes the video signal and audio signal. You
> [Æ Recording/Media Setup] > [HDMI Time Code] >
> [Æ Recording/Media Setup] > [Rec Command] is set
147
External
monitor/
digital video
recorder
HDMI inputs