Canon EOS R5C Advanced User's Manual page 142

File Operations
Adding $ Marks or % Marks
You can add an OK mark ($) or check mark (%) to XF-AVC clips to help you identify particular clips. Since clips
with an $ mark cannot be deleted with the camera, you can use this mark also to protect important clips.
142
Adding an $ Mark or % Mark During Playback
You can add an $ mark or % mark to a clip during playback or playback pause.
1 Set an assignable button to [Add $ Mark] or [Add % Mark] (A 121).
2 During playback/playback pause of an XF-AVC clip, press the assignable button to add the clip mark.
• [$Mark] or [%Mark] will appear briefly and the selected clip mark will be added to the clip.
• Playback will be paused.
Adding an $ Mark or % Mark from the Index Screen
1 Select the desired clip from the XF-AVC index screen.
2 Press SET (file menu) and select [Add $ Mark] or [Add % Mark] > [OK].
• The selected clip mark is added to the clip.
NOTES
• A clip cannot have both an $ mark and % mark at the same time. When you add a % mark to a clip with an
$ mark, the $ mark will be deleted. Similarly, when you add an $ mark to a clip with a % mark, the %
mark will be deleted.
Deleting $ Marks or % Marks
You can delete an $ mark or % mark added to an XF-AVC clip.
1 Select the desired clip from the XF-AVC index screen.
2 Press SET (file menu) and select [Delete $ Mark] or [Delete % Mark] > [OK].
• The selected mark is deleted.
Adding/Deleting Shot Marks
During the playback of a clip recorded in XF-AVC format, you can add shot marks (!) to particular frames in the
clip that you want to single out. You can also delete all shot marks at once.
Adding Shot Marks during Playback
1 Set an assignable button to [Add Shot Mark] (A 121).
2 During playback/playback pause of an XF-AVC clip, press the assignable button at the point in the clip where
you want to add the shot mark.
• [Shot Mark] will appear briefly and the shot mark will be added to the current frame of the clip.
• Playback will be paused.