General Information; Marking Plate; Intended Uses; Allowed Environmental Conditions - National Flooring Equipment DL3000P Operating & Service Manual

Table of Contents

Advertisement

MARKING PLATE

When contacting the manufacturer or dealer, always quote the details shown on the marking plate.

INTENDED USES

This dust collector has been designed, built and protected for vacuuming dusts and solid materials only.
CAUTION: ALWAYS USe SPeCIFIC FILTeRS FOR THe TYPe OF DUST OR MATeRIALS TO Be vACUUMeD.
Any other use is considered IMPROPER. The dust collector is intended for professional industrial use.

ALLOWED ENVIRONMENTAL CONDITIONS

To ensure proper operation of the dust collector, avoid exposing machine to rain, hail, snow, fog, etc. environmental running temperature is
between 41°F (5°C) and 113°F (45°C) and relative humidity not above 70%. The work environment must be devoid of explosive atmosphere.

NOISE LEVEL

Noise level readings were taken in accordance with the provisions of Machine Directive 2006/42/Ce standards.
Sound tests performed on this specific dust collector model have been taken from a distance of 3.3 feet (1 meter) and from a height of 5.25 feet
(1.6 meters), showing an acoustic pressure no higher than:
The vibrations transmitted by the machine are lower than 8.2 ft/s2 (2.5 m/s2).
ATTENTION!
PURSUANT TO ARTICLeS L.D. 81/08, WORKeRS eXPOSeD TO SOUND PReSSURe LeveLS ABOve 85 DB (A) MUST Be PROTeCTeD BY
SPeCIAL INDIvIDUAL PROTeCTION DevICeS.
IT IS THeReFORe NeCeSSARY, IF SUCH WORKING CONDITIONS eXIST, TO PROvIDe WORKeRS WITH SUCH APPROveD INDIvIDUAL PROTeC-
TION DevICeS AND TO INFORM THeM OF THe RISKS ReLATING TO NOISe eXPOSURe.

STORAGE

Remove the filter and clean it, replace the Longopac® bag and store the dust collector in a place protected against moisture with a temperature
between 32°F (0°C) and 104°F (40°C). Cover with a nylon sheet to prevent accumulation of dust.

HANDLING

If the need arises to lift and transport the dust collector, this operation must be performed under the responsibility of the user. The user is there-
fore responsible for properly securing the load to prevent machine damage or injury to personnel.

General Information

76 DB (A)
7
406124_RevC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dl4000p

Table of Contents