Informative Notes; General Safety Warnings - National Flooring Equipment DL3000 Service Manual

3.1

Informative notes

This section describes the control and special maintenance operations crucial for keeping the dust collector
in perfect working condition. All other maintenance and major repairs must be expressly authorized by the
manufacturer. In such cases, always contact NFE or an authorized dealer.
3.2

General safety warnings

Maintenance jobs must always be performed by skilled technicians, trained to carry out their specific jobs.
In the case of this machine, these are:
Mechanical maintenance

Electrical maintenance

The Safety Manager has the precise duty of determining the professional capacities and skills of such
persons.
Before doing any maintenance job, the safety manager must:
Make sure there are no unauthorized persons in the work area.

Make sure the necessary tools are on hand and that these are in good condition.

Make sure that lighting is adequate and, if necessary, provide 24-V portable lamps.

Make sure the maintenance engineer is equipped with all approved individual protection devices

needed for the specific operation (gloves, eyewear, shoes, etc.).
Make sure the maintenance engineer has carefully read the instructions contained in this manual and

knows how the dust collector works.
Before carrying out a maintenance job, the maintenance engineer must:
Disconnect the plug from the power socket.

Work done on motors or other electrical component parts must only be performed by a specifically trained
electrician, authorized by the Safety Manager.
Always use tools that are in perfect condition and specifically made for the operation to be done. The use of
unsuitable tools or tools not in good condition could cause serious damage.
- 11 -
Maintenance Section