Dust Collector Safety Guidelines - National Flooring Equipment DL3000P Operating & Service Manual

Table of Contents

Advertisement

DUST COLLECTOR SAFETY GUIDELINES

Before use, anyone operating this equipment must read and understand these safety instructions.
SAFETY DETAILS
The person in charge of safety shall be responsible for informing
workers about the risks associated with dust collector operation.
The obligation also exists of training workers so they are able to
protect themselves and others.
Failure to observe basic safety regulations and warnings could
cause accidents during dust collector operation, maintenance and
repair. Accidents can often be avoided by recognizing potentially
dangerous situations before these occur. Operators should be
aware of potential hazards and be trained and skilled enough.
They should also have the tools necessary to perform these duties
properly.
NFe shall under no circumstances be deemed liable for accidents
or damage caused by use of the dust collector by personnel not
properly trained or who use it in an improper manner, as well as
by even partial failure to comply with the safety regulations and
intervention procedures indicated in this manual.
The safety warnings and warning notices are indicated in this
manual and on the product.
Unless these hazard messages are heeded, the operator could
become involved in accidents with serious consequences for him/
herself and for other people.
WARNING: UNLeSS THeSe MeSSAGeS ARe HeeDeD,
OPeRATOR INJURIeS COULD OCCUR.
CAUTION: UNLeSS THeSe MeSSAGeS ARe HeeDeD,
DUST COLLeCTOR DAMAGe COULD OCCUR.
NFE cannot foresee all possible circumstances capable of repre-
senting a potential hazard. The warnings in this manual and on the
products should not therefore be deemed exhaustive. In the event
of tools, procedures, work or machining methods being used that
are not explicitly recommended by NFe, make sure no hazards
exist for operators and others.
ONLY EVER USE ORIGINAL NFE SPARE PARTS.
NFE DECLINES ALL LIABILITY IN THE EVENT OF NON-ORIGINAL
SPARE PARTS BEING USED.
9
Safety
406124_RevC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dl4000p

Table of Contents