Outstanding Risks - National Flooring Equipment DL3000P Operating & Service Manual

OUTSTANDING RISKS

Careful analysis of risks performed by the manufacturer and stored in the technical file has made it possible to eliminate most of the risks
associated with dust collector operation.
The manufacturer advises carefully following the instructions, procedures and advice contained in this manual as well as applicable safety
regulations, including the use of the envisaged protection devices, both those integrated in the dust collector and individual.
Outstanding risks associated with the dust collector could be:
RISK OF IMPROPER USE IN THE PRESENCE OF EXPLOSIVE AND FLAMMABLE SUBSTANCES.
The dust collector must not be used in environments containing substances in the form of liquids that could vaporize at room temperature and
flammable dusts and gas.
RISKS OF OPERATION IN HUMID ENVIRONMENTS.
Keep to the limits shown in this manual at section 1.5 Allowed environmental conditions.
RISK OF ERRONEOUS INTERPRETATION OF THE SAFETY PICTOGRAMS.
Having identified the various outstanding risks, the manufacturer has affixed to the dust collector a number of hazard labels in compliance with
regulations relating to the graphic symbols to be used. The user must immediately replace any safety plates that become illegible due to wear
or damage.
WARNING: ReMOvING THe SAFeTY PLATeS ON THe DUST COLLeCTOR IS STRICTLY FORBIDDeN. THe MANUFACTUReR
DeCLINeS ALL LIABILITY IN ReLATION TO DUST COLLeCTOR SAFeTY IN THe eveNT OF FAILURe TO COMPLY WITH THe ABOve
INDICATIONS.
15
Safety
406124_RevC