Prior To Installation; Tools Required; Care And Maintenance - Kraus Urbix KPF-3125 Installation Manual

STOP

Prior to Installation:

Make sure you have all necessary parts by checking the diagram and parts list. If any
·
part is missing or damaged, please contact Kraus Customer Service at 800-775-0703
for a replacement.
· Read all instructions and safety warnings and ensure you have all tools, parts, and
equipment necessary for a safe installation.
Turn off the hot and cold water supply at the angle stops and turn on the old faucet
·
to release any built up pressure. Remove existing faucet. Clean sink or countertop to
remove any debris, plumber's putty, or silicone.
· Flush angle stops to release any debris prior to installation.
· Pre-drilled hole size requirement: 1 1/4" (min) - 1 1/2" (max)
· Max countertop thickness: 2 1/2"
· 3 or 4 hole installation

Tools Required

Adjustable Wrench
Care & Maintenance
To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
This installation manual is subject to change without further notice.
Phillips Screwdriver
R
Silicone Sealant Safety Goggles
ACID
3