Troubleshooting - Panasonic ES-ST37 Operating Instructions Manual

Replacingthesystemouterfoilandtheinnerblades
system outer foil once every year
inner blades once every two years
► Removingtheouterfoilsection 
Press the foil frame release buttons and lift the
outer foil section upwards.
► Attachingtheouterfoilsection 
After turning the water inlet surface to the front,
securely attach the outer foil section to the shaver
until it clicks.
► Replacingthesystemouterfoil 
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the water inlet surface and the system
outer foil mark ( ) and securely attach
together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
► Replacingtheinnerblades 
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they
click.
14
►Replacementparts

Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑ST37

Troubleshooting

Shavings fly all over.
System outer foil gets hot.
2
1
1
The shaver cannot be
properly cleaned even
after water is poured from
the water inlet.
The blades do not dry.
1 2
System outer foil
Inner blades
Problem
This can be improved by cleaning
every time after shaving. If shavings
are stuck on the inner blades, clean
them with the cleaning brush.
Confirm that the cleaning shutter
is firmly closed.
Apply oil.
(See page 13.)
Replace the system outer foil if it
is damaged or deformed.
(See this page.)
When the shaver is very dirty, first
use the cleaning brush to remove
beard trimmings.
Or, remove the foil frame and
wash with water.
(See page 13.)
The blades may not dry quickly
due to temperature conditions.
The blades can be dried more
easily by removing for drying.
WES9087
WES9068
Action