UsingTheShaver - Panasonic ES-ST37 Operating Instructions Manual

3
3
Holdthepowerswitchfor
2secondsormoretoswitchto
shavingfoammode.
The shaving sensor lamp (
and charge status lamp (
blink alternately.
• After 15 seconds in shaving foam mode, the shaver switches
automatically to shaving sensor mode. (See this page.)
• Press the power switch during shaving foam mode to switch
to shaving sensor mode.
4
4
Pressthebladesgentlyinthe
palmofyourhand,mixthefacial
cleanseretc.aroundandmovethe
bladesupanddowntomakefoam.
• If there is insufficient foam, add slightly
more water, hot water or facial cleanser
etc. to make it easier to create foam.
► Notes

• Before making foam, check that the blades are not broken or
deformed, and that the cleaning shutter is closed.
• Do not use shaving agent (excluding foam), facial cleansing foam
(with scrubbing compounds) or soap as these may cause the
blades to clog, or be unable to make foam.
)
)

Usingtheshaver

1
1
Pressthepowerswitchtoselectthedesired
shavingmode.
• Each time you press the power switch, the shaving mode
changes from "Shaving sensor mode"
"OFF."
Shavingsensor
Normalmode
mode
Beard thickness is
automatically
The power level is
sensed and the
power is
maintained while
automatically
adjusted when
shaving.
The shaving sensor
The shaving sensor
lamp ( ) glows
lamp (
blue.
• The shaving sensor may not respond depending on the
thickness of the beard or the type of the shaving gel, but
this is normal.
"Normal mode"
OFF
constantly
—
shaving.
The shaving sensor
) turns off. lamp ( ) turns off.
11