System Overview - Fidelis Deception Decoy Server FDH-1000-C Quick Start Manual

1. System Overview

Fidelis Deception Decoy Server appliance runs emulated and Real OS decoys. It is connected to Trunk
port and/or multiple flat networks, and it communicates with assets on your networks.
Figure 1: Fidelis Deception – Decoy Server Appliance – Rev-K
The Decoy Server reports deception alerts when attackers access the decoy. The Decoy Server reports
the deception alerts to your on-premises Fidelis CommandPost or to the remote Fidelis Network Cloud.
Your configuration depends on which environment you are using.
Decoy Server Setup Checklist

Fidelis Decoy Server – Appliance Requirements
Appropriate rack space, power, and cooling
Rack tools, rails, and connectors
Keyboard and video monitor / KVM switch for temporary appliance setup
Power cables – two per appliance, appropriate power source and region
Ethernet cables (cat5e and optical) for Admin, Monitor, and iLO ports
Network switches with enough physical ports
Optical transceivers for switches
Logical network information: IP addresses, hostnames
.
Copyright © 2022 Fidelis Cybersecurity
(Appendix
(Section
®
, Inc. All rights reserved
B)
(Section 3)
4)
(Section 5, Appendix A)
www.fidelissecurity.com
2