Fidelis Deception Decoy Server FDH-1000-C Quick Start Manual page 8

7. Decoy Server Network Configuration
1. Power on the appliance(s).
2. Connect to the component CLI using one of the following methods:
‒
Via KVM Console
‒
Via Console or iLO
Via KVM Console
Connect a keyboard and monitor to the appliance. For Fidelis Decoy Server version 9.4 or later,
the following screen is displayed. If you do not see this screen, connect via SSH (see instructions
below).
With Erase & Install deception server selected, press Enter.
.
Copyright © 2022 Fidelis Cybersecurity
®
, Inc. All rights reserved
8
www.fidelissecurity.com