Fidelis Deception Decoy Server FDH-1000-C Quick Start Manual page 4

3. Decoy Server: Network Port and Cabling Requirements
You must connect each appliance to the various networks with appropriate cables and in some cases,
SFP+ transceivers. The tables below describe the physical connection and cable type associated with
each port on the appliance.
Decoy Server Appliances with Copper Ports
Port Label Physical Connection Type (default)
Admin (eth0) GbE Copper RJ45 (copper)
Decoys (eth1) GbE Copper RJ45 (copper)
Decoys (eth2) GbE Copper RJ45 (copper)
Decoys (eth3) GbE Copper RJ45 (copper)
iLO GbE Copper RJ45 (copper)
Figure 2: Rear Port Assignments– Decoy Server with Copper Ports (Rev-K)
.
Copyright © 2022 Fidelis Cybersecurity
Decoys
Decoys
(eth2)
(eth1)
Admin
iLO
(eth0)
®
, Inc. All rights reserved
Cable Type (minimum)
Cat 5e patch cable
Cat 5e patch cable
Cat 5e patch cable
Cat 5e patch cable
Cat 5e patch cable
Decoys
(eth3)
Decoy Server FDH-1000-C
Decoy Server FDH-3000-C
4
DL360
www.fidelissecurity.com