Fidelis Deception Decoy Server FDH-1000-C Quick Start Manual page 6

4. Decoy Server Networking Environment
Decoy server appliances can connect to multiple networks to deploy different decoy services. Decoys can
operate whether ports are connected to:
•
Trunk ports, which enables communication on multiple subnets from the same port on the
appliance,
and/or
•
Ports directly to specific subnets
Admin Network
The Admin network connects Fidelis Decoy server to the CommandPost, and optionally to an
on-premises Fidelis Sandbox. You need one switch port per Decoy server appliance for the Admin
network.
Appliance
Decoy Server
Decoy eth1, Decoy eth2, Decoy eth3
Ports to connect the Decoy server appliance to subnets through network switch directly certain subnets
and/or use trunk port.
Appliance
Decoy Server
Decoy eth4, Decoy eth5, Decoy eth6, Decoy eth7 (additional ports)
Most environments using higher network throughput will use these ports. You can connect the Decoy
server to a trunk port and/or to certain subnets through the switch.
Appliance
Decoy Server 1GbE
Decoy Server 10-GbE
iLO Network
Optional network for remote/out-of-band server administration. You will need on additional switch port for
each iLO connection.
Appliance
Decoy Server
.
Copyright © 2022 Fidelis Cybersecurity
Switch Port Type
GbE Copper RJ45 port
Switch Port Type
GbE Copper RJ45 port
Switch Port Type
GbE Copper RJ45 port
Duplex LC Connector, 1GbE or 10GbE
Switch Port Type
GbE Copper RJ45 port
®
, Inc. All rights reserved
6
Qty
1
Qty
3
Qty
4
2
Qty
1
www.fidelissecurity.com