Installation Steps - BEA LZR RS300 User Manual

APPLICATIONS
CURVED DOORS - 4 curtains

INSTALLATION STEPS

1
MOUNTING
1
Use the adhesive
mounting template
to position the sensor
correctly. The grey area
indicates the detection
range.
5
Open the protection
cover, plug the
connector and position
the cable in the slit.
2
Drill 4 holes as indicated
on the mounting
template. Make a hole
for the cable if possible.
6
Close the protection
cover and fasten it firmly.
FLAT DOORS - 1 curtain
3
Pass the cable +/- 10 cm
though the cable opening.
If drilling an opening is
not possible, use the cable
conduits on the back side of
the bracket.
7
Position the housing on
the bracket.
4
Position the bracket
and fasten the 4 screws
firmly.
8
Turn the sensor until the
two triangles are face
to face.
5