Unipoe PM110GM V2 User Manual

Table of Contents

Download this manual

User Guide

8-Port Gigabit+2G SFP Ethernet managed switch

Table of Contents

Need help?

Do you have a question about the PM110GM V2 and is the answer not in the manual?

Page 1 User Guide 8-Port Gigabit+2G SFP Ethernet managed switch...
Page 2 Item Listing Carefully open the box, inside box should have the following items ： Switch * 1 User manual * 1 Power cord *1 Mounting accessories (hook*2; MATS*4; screw*8) If damage or shortage of found objects, please contact local dealers. 1.
Page 3 LED indicator light Color Description Death: switch does not power on Green Permanent: the switch is powered on Blinking: the system works System Green Permanent: the system is starting or has no power Death: not connected to the network equipment LNK/ACT Green Green light: connected to 10/100/1000Mbps devices...
Page 4 3. Installation of equipment This part describes how to install your Ethernet Switch and make connections to it. Please follow the following instructions in avoid of incorrect installation causing device damage and security threat. Before cleaning the switch, please unplug the power plug of the switch. Do not use a damp cloth or liquid to clean the switch.
Page 6 Note: Please confirm the voltage is correct before power on, otherwise the switch will be damaged. (The power input is: 100V-240Vac, 50/60Hz.) Specifications Model PM110GM V2 IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE Standard 802.1q, IEEE 802p, IEEE 802.1d, IEEE 802.1w, IEEE 802.3ad 10BASE-T: UTP category 3,4,5 cable (≤100m)