Download Print this page

Unipoe PM3022GSNL-330 V2 User Manual

16-port gigabit +4g utp+2g sfp poe switch with lcd display

Advertisement

Quick Links

User Guide

16-Port Gigabit +4G UTP+2G SFP PoE Switch with LCD Display

Advertisement

loading

Summary of Contents for Unipoe PM3022GSNL-330 V2

  • Page 1: User Guide

    User Guide 16-Port Gigabit +4G UTP+2G SFP PoE Switch with LCD Display...
  • Page 2: Package Contents

    Package Contents Check the following contents of your package:  PoE Switch x 1  User Guide x1  Power Cord x1  Accessories(Rack Mount Accessory Kit*2 ,Rubber Feet*4, screw*8) If any part is lost and damaged, please contact your local agent immediately. Introduction 16-Port Gigabit +4G UTP+2G SFP PoE switch is 16-port 10/100/1000Mbps PoE RJ45 and 4*10/100/1000 RJ45 Uplink Port with 2 Gigabit SFP Slots.
  • Page 3 LED indicator Color Function Off: No Power supply. Green Light: Indicates the switch has power. Off: No device is connected to the corresponding port. Light: Indicates the link through that port is successfully established at 10/100Mbps. Blink: Indicates that the Switch is actively sending or receiving data over that port.
  • Page 4 Power socket Connect the female connector of the power cord here, and the male connector to the AC(Alternating Current) power outlet. Please make sure the voltage of the power supply meets the requirement of the input voltage Grounding column The switch already comes with lightning protection mechanism. You can also ground the switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
  • Page 5 Turn on the switch Please connect the AC power cord into the rear of the switch and to an electrical outlet (preferably one that is grounded ). When the switch is power on, the LED indicators flash momentarily for one second, which represents a resetting of the system.The Power LED indicator turns on green.
  • Page 6: Specifications

    Specifications IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3az, IEEE802.3x Standard IEEE802.3af, IEEE802.3at 10BASE-T: UTP category 3,4,5 cable (≤100m) 100BASE-TX: UTP category 5 cable (≤100m) Network Media 1000BASE-T: UTP category 5e cable (≤100m) 1000BASE-X: MMF, SMF MAC Address Table 8K, Auto-learning, Auto-aging Transfer mode Store-and-Forward 10Base-T: 14881pps/Port Frame Forward Rate...

This manual is also suitable for:

P6-s12gl