Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Unipoe PM3018GSNL V3
Summary of Contents for Unipoe PM3018GSNL V3
- Page 1 PM3018GSNL V3 PoE Switch PM3026GSNL V3 PoE Switch...
-
Page 2: Package Contents
If any part is lost and damaged, please contact your local agent immediately. 1. Introduction Thank you for choosing UNIPOE PoE Switch. The PM3018GSNL V3 and PM3026GSNL V3 Provides 16(24)-10/100/1000Mbps PoE RJ45 Port and 2-Gigabit SFP Slot. Its PoE ports can automa cally detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PD). -
Page 3: Hardware Description
2. Hardware Description 2.1 Front Panel The Front Panel of the PoE Ethernet Switch Consists of Ethernet Ports. The LCD Display and LED indicators are also located on the panel. 16-Port Gigabit + 2G SFP PoE Switch Ⅲ 菜单 PM3018GSNL Menu 确认... - Page 4 2.2. Rear Panel The rear panel of the PoE Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC, 50/60HZ. Grounding column AC Power Port 2.3. LCD Features These PoE Switch are with the func on of the LCD display and PoE. The LCD can display the working condition of PoE port not only, still can accurately show the state of each port, such as: Output power, Overload, Short circuit, Light load, Low voltage, Over voltage,High temperature, and so on...
- Page 5 Settings, in turn, as shown in the f igure below: the LCD viewing angles, smart fan control, language selec on and the func on of the screen concretely: Safe Stable Unique www.unipoe.com Main Menu Main Menu 01 — PSE power Fine Switch Mode 05 —...
- Page 6 3.2. Rack -mountable Installation The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack. To do this, first, please install the moun ng brackets on the switch’s side panels (one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to mount the switch on the 19 inch rack.
- Page 7 3.3 Turn on the switch Please plug the power supply into the switch, the internal power system of the switch can Auto-regulate the working power according to the actual input power. When the switch is power on, the power indicator will be light on the front panel of the switch shines.
-
Page 8: Specifications
Specifications Model PM3018GSNL V3 PM3026GSNL V3 IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3az, IEEE802.3x, Standard IEEE802.3af, IEEE802.3at 10BASE-T: UTP category 3,4,5 cable (≤100m) Network - 100BASE-TX: UTP category 5 cable (≤100m) Media(Cable) 1000BASE-T: UTP category 5e cable (≤100m) 1000BASE-X: MMF or SMF SFP module(Op onal) - Page 9 电源线 ......一根 安装附件（挂耳*2、螺钉*8、脚垫*4） 如果发现有物件损坏或者短缺的情况，请及时和当地经销商联系。 一、产品简介 感谢您购买 UNIPOE PoE Switch， PM3018GSNL V3和PM3026GSNL V3提供16（24）个 10/100/1000Mbps 自适应 RJ45 端口 ， 2 个 1000Mbps SFP 光纤插槽。 所有 RJ45 端口均支持线速转发与自动翻转功能，无需 配置，即插即用。可视 PoE 能显示 PoE 工作状态，对端口工作情况及负载情况进行精确判断，以帮助 客户及布线工程师及时发现和解决问题，排除网络故障，提高工作效率和工程质量。...
- Page 10 二、外观描述 2.1 前面板 下列 PoE 交换机前面板示意图： 16-Port Gigabit + 2G SFP PoE Switch 菜单 Ⅲ PM3018GSNL Menu 确认 Enter 返回 Back 1000M 10/100M PoE 端口显示状态 LED 指示灯 16*10/100/1000Mbps PoE 端口 2*1000Mbps 光纤插槽 24-Port Gigabit + 2G SFP PoE Switch Ⅲ 菜单...
- Page 11 2.2 后面板 PoE 交换机的后面板示意图:一个交流电源接口， 电源输入范围为 100-240V AC, 50/60HZ。 一个接地螺丝 孔。 防雷接地柱 AC 电源接口 2.3 可视 PoE功能 PM3018GSNL 和 PM3026GSNL 是全千兆可视 PoE 交换机，LCD 屏能显示 PoE 端口的工作状况，对每个 端口的输出功率、过载、短路、轻载、低压、过压、芯片过温等状态作出精确显示，让您对 PoE 供电 情况“芯”中有数。 交换机端口信息 交换机端口信息 交换机端口信息 ---- W ---M ---M ---- W 877M ---M ---M 631M 13.4 W ---M 920M...
- Page 12 不仅如此可视三代在二代的基础上增加了彩屏Logo显示，菜单按钮，交换机模式，带宽显示及预警， PD类型，PSE功率微调及优先级，PoE端口开关控制，LCD开关.增强了LCD的可视角度，智能风扇控制， 语言选择及出厂设置的功能 依次如下图所示：具体操作见屏操作手册 安全 稳定 与众不同 www.unipoe.com 主菜单 主菜单 PSE 功率微调 01 — 交换机模式 05 — PSE 端口优先级 02 — 带宽预警 06 — PSE 端口开关 03 — PD 类型 07 — PoE 掉线自连 LCD 开关 04 — 08 —...
- Page 13 3.2 机架式安装 检查 EIA-19inch 机柜的接地与稳定性，首先，用螺钉将安装挂耳固定在交换机前面板两侧将交换机放 置在机柜的一个托架上，沿机柜导槽移动交换机至合适位置，然后，用螺钉将安装挂耳固定在机柜两 端的固定导槽上，确保交换机稳定地安装在机柜槽位的托架上。设备的挂耳并不用来承重，它只起固 定作用。安装设备于机柜时，设备机箱的下边要有托架（固定在机柜上）来支撑设备。 - 12 -...
- Page 14 3.3 开启交换机 接上电源线，插上插头，接通电源。开机以后，交换机将自动进行初始化，所有的端口指示灯全亮后 熄灭，表示系统复位成功。电源 LED 指示灯一直常亮。 注意：上电前请确认电压是否正确，否则将损坏设备。（电源输入范围 100-240V AC 50/60Hz） 。 - 13 -...
- Page 15 技术规格 PM3018GSNL V3 PM3026GSNL V3 产品名 IEEE802.3、IEEE802.3u、IEEE802.3z、IEEE802.3ab、IEEE802.3az、IEEE802.3x 标准 IEEE802.3af、IEEE802.3at 10BASE-T： Cat 3、4、5 非屏蔽类双绞线(≤100m) 100BASE-TX：Cat 5 及以上非屏蔽类双绞线(≤100m) 网络介质（线缆） 1000BASE-T：Cat 5e 及以上非屏蔽类双绞线(≤100m) 1000Base-X: MMF or SMF SFP 模块 (可选) PoE 可视功能 LCD 实时显示 PoE 活动状态 MAC 地址表 8K，自动学习，自动更新 传输模式 存储转发 10Base-T： 14881pps/端口...
Need help?
Do you have a question about the PM3018GSNL V3 and is the answer not in the manual?
Questions and answers