1. Manuals
  2. Brands
  3. Unipoe Manuals
  4. Switch
  5. P6-S20FL
  6. User manual

Unipoe P6-S20FL User Manual

16-port10/100mbps+2 gigabit tp/sfp combo poe switch
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

User Guide

16-Port10/100Mbps+2 Gigabit TP/SFP Combo PoE Switch
PoE Port 1-4:Max 60W，PoE Port5-12：Max 32W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P6-S20FL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Unipoe P6-S20FL

Summary of Contents for Unipoe P6-S20FL

  • Page 1: User Guide

    User Guide 16-Port10/100Mbps+2 Gigabit TP/SFP Combo PoE Switch PoE Port 1-4:Max 60W，PoE Port5-12：Max 32W...

  • Page 2: Package Contents

    Package Contents Chek the following contents of your package PoE Switch x 1 User Guide x1 Power Cord x1 Accessories(Rack Mount Accessory Kit*2 ,Rubber Feet*4, screw*8) If any part is lost and damaged, please contact your local agent immediately. The 16FE+2G Combo is Gigabit Uplink Unmanaged Switch which provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to boost your old network to 1000Mbps.
  • Page 3 DIP Switch The DIP switch located on the le panel. Standard: the factory default mode, 16FE+2G Combo can normal communica on between port 1~18. VLAN Mode :1~1 port can be isolated each other but 1~16 port can connect to17/18 port a er open CCTV mode to stop broadcast storm to increase forwarding rate of frame.1~16 port up to 250m PoE distance allows you to expand your network via Ethernet cable to where there is no power line or outlet but where you want to fix device such as IP Cameras.

  • Page 4: Rear Panel

    Rear Panel The rear panel of the PoE Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC, 50/60HZ. 100~240V AC 50/60Hz Grounding column Power Socket Power socket Connect the female connector of the power cord here, and the male connector to the AC(Alterna ng Current) power outlet.

  • Page 5: Turn On The Switch

    The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack. To do this, first, please install the moun ng brackets on the switch’s side panels (one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to mount the switch on the 19 inch rack.
  • Page 6 Model 16FE+2G Combo IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x Standard IEEE802.3af, IEEE802.3at 10BASE-T: UTP category 3,4,5 cable (≤100m) 100BASE-TX: UTP category 5 cable (≤100m) Network Media 1000BASE-T: UTP category 5e cable (≤100m) 1000BASE-X: MMF, SMF MAC Address Table 4K, Auto-learning, Auto-aging Transfer mode Store-and-Forward 10Base-T: 14881pps/Port...

Table of Contents