Advertisement
Quick Links
Advertisement
Related Manuals for Unipoe PM3020FSN
Summary of Contents for Unipoe PM3020FSN
- Page 1 User Guide 16FE(PoE)+2G TP/SFP Combo PoE Switch...
-
Page 2: Package Contents
Package Contents Check the following contents of your package: PoE Switch x 1 User Guide x 1 Power Cord x 1 Accessories(hanging ears*2,Rubber Feet*4,screw*8) If any part is lost and damaged, please contact your local agent immediately. Introduction The 16FE(PoE) +2G TP/SFP Combo PoE Switch are Gigabit Uplink Unmanaged Switch which provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to boost your old network to 1000Mbps. - Page 3 Off: Indicates the link through established at 10Mbps. Speed Green Blink: Indicates the link through established at 100Mbps. Light: Indicates the link through established at 1000Mbps. Off: No PoE powered device (PD) connected Light: There is a PoE PD connected to be port, which Orange supply power successfully.
- Page 4 Desktop Installation Install the Switch on a desktop, please attach these cushioning rubber feet provided on the bottom at each corner of the Switch in case of the external vibration. Allow adequate space for ventilation between the device and the objects around it. The installation diagram is as follows: Rack-mountable Installation The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack.
-
Page 5: Specifications
Turn on the switch Plug in the negative connector of the provided power cord into the power socket of the device, and the positive connector into a power outlet . After the device is powered on, it begins the Power-On Self-Test. The PWR LED indicator will light on all the time.