Samsung SMG-3200 User Manual page 98

Chapter 5
5-22
CLI (Command Line Interface)
2. Input the number of the dial method to be changed, and press [Enter].
Configuration Item Number:
3. Specify a value referring to the following table, and press [Enter].
No No No No Item Item Item Item
0 Dial Type Selection
DTMF Holding Time
1
(1 ~ 99)
2 Calling Number Request
3 Calling Number Response
4 Called Status Request
5 Called Status Response
Calling Extension
6
Response
Number 0 and 1 are used in MFC type and the rest are used in
R2MFC type.
Description Description Description Description
Selects a trunk digit transmission type.
0. MFC : Multi-Frequency (DTMF) type
1. PULSE : Pulse type
2. R2MFC : R2MFC type
Specifies MFC digit holding time. Typed
number x 100msec is the holding time.
Sets whether caller's number identification is
to be requested (ON) or not (OFF) to the
other party.
Sets whether you accept (ON) or not (OFF)
the other party's request for caller's number
identification.
Sets whether you request (ON) or not (OFF)
the other party for call status.
Sets whether you accept (ON) or not (OFF)
the caller's request for call status.
Must be specified when the SMG-3200 is
used in Standalone mode, but it is currently
not in service.