Chapter 5
5-70
CLI (Command Line Interface)
CDRsetlist
CDRsetlist
CDRsetlist
CDRsetlist
Function
It displays the current setting of the options related to the CDR of the system.
You can use other CDR CLI commands to change the setting.
Default
Procedure
TCP Link
Off
TCP Port
8200
UDP Link
Off
UDP Port
Unknown
UDP IP Address
Unknown
you want to see the setting of the CDR-related options, type 'CDRsetlist' at the
SMG-3200 prompt, and press [Enter].
SMG3200:165.213.81.230> CDRsetlist
>>>[CDR] Turn On CDR Output on TCP Link
>>>[CDR] TCP Port: 8200
>>>[CDR] Turn Off CDR Output on UDP Link
>>>[CDR] UDP Port: Unknown
>>>[CDR] UDP IP Address = Unknown
value = 37 = 0x25 = '%'
SMG3200:165.213.81.230>
← tcp link is turned On.
← tcp port is set as 8200.
← udp link is turned Off.