Samsung SMG-3200 User Manual page 148

Chapter 5
5-72
CLI (Command Line Interface)
CDRudpport ip1,ip2,ip3,ip4,port CDRudpport ip1,ip2,ip3,ip4,port
CDRudpport ip1,ip2,ip3,ip4,port CDRudpport ip1,ip2,ip3,ip4,port
Function
Procedure In the SMG-3200 prompt, type 'CDRudpport' and a space, and type the UDP IP
Set the UDP IP address and UDP port for the UDP Link that will display the CDR
output information.
address and port for displaying the CDR information, and then press [Enter].
Separate the parameters from one another by means of a comma (,).
For example, if you want to set the IP address as 165.213.87.85, and the port as
8800 for the UDP Link for displaying the CDR information, type 'CDRudpport
165,213,87,85,8800' on the screen, and press [Enter].
SMG3200:165.213.81.230> CDRudpport 165,213,87,85,8800
>>>[CDR] Set CDR Output on UDP IP = 165.213.87.85
>>>[CDR] Set CDR Output on UDP Port(8800)
Goodvalue = 0 = 0x0
SMG3200:165.213.81.230>
← udp IP address is set as 165.213.87.85.
← udp port is set as 8800.