Table of Contents
Advertisement
Chapter 5
5-78
CLI (Command Line Interface)
dbfilehelp
Function
Procedure At the SMG-3200 prompt, type 'dbfilehelp,' and press [Enter]. Then the following
This command displays the CLI commands related to system information Backup
and save. The DB Down/Upload function is used to save system information in a
file, or transfer the information saved in a file to the system. It is used to apply
information on one system to several other systems, or to back up system
information and recover the system from system failures. The system information
file is an ASCII file.
DB-related CLI command list is displayed on the screen.
SMG3200:165.213.81.230> dbfilehelp
dbfilehelp
getdefdb "filename"
getdb "filename"
putdb "filename"
dump "filename"
load "filename"
value = 2 = 0x2
SMG3200:165.213.81.230>
Print This List
Generate File with Default DB Value
Generate File from Current DB Value
Update System DB from File
Print DB File to Console
Write DB File from Console
Advertisement
Table of Contents
