Table of Contents
Advertisement
Chapter 3
3-2
Installing the System
Condition of the Installation Location
SMG-3200 system can be installed in a rack or on a table. To operate the SMG-3200 system
securely, you have to find the location that satisfies the conditions described in this chapter before
setting up the system.
Please do not place the unit on a table with a table cloth, and do not cover
the ventilation slots.
Space Condition
You have to select the location that satisfies the following conditions such as safety condition and
temperature/humidity condition.
Safety Condition
Remove the objects that are sensitive to fires such as explosive gas and flammable objects in the
exchange room.
Before setting up the system, check that every condition is satisfied such as the power wiring,
grounding, voltage, frequency, and etc.
If the power switch or circuit breaker is open, be sure to remove the power supply line's
blocking route.
If the PSTN is connected with the system, set up the protection element in the MDF.
If subscriber cable goes outside, set up the protection element in the MDF.
Place a booklet that provides emergency measures, grate, artificial respiration and heart
resuscitation information in the exchange room to prepare for emergency cases such as electric
shock.
Installation is to be performed by qualified service personnel only.
To be installed in Restricted Access Areas.
Advertisement
Table of Contents
