Advertisement
User's manual
Chain Breaking and Riveting Tool
30206
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Table of Contents
Related Manuals for WilTec 30206
Summary of Contents for WilTec 30206
- Page 1 User’s manual Chain Breaking and Riveting Tool 30206 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 6. Tighten the pressure screw by hand, using the slide handle or a 14 mm wrench. 7. Press the chain bolt all out of the chain and through the C-frame hole. © by WilTec Wildanger Technik GmbH Item 30206 Page 3 http://www.WilTec.de...
- Page 4 9. Remove the tool from the chain. Make sure that both chain bolts have an identical border. Make sure that the riveted side plate is equally aligned with the side plates of the neighbouring chain link. © by WilTec Wildanger Technik GmbH Item 30206 Page 4 http://www.WilTec.de...
- Page 5 Guides Riveting tip Anvil Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 30206 Page 5 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de...
Need help?
Do you have a question about the 30206 and is the answer not in the manual?
Questions and answers