Advertisement
Small wheels can be attached to the baseplate
of the vacuum cleaner. For this purpose, the pin
of the wheels must be pressed into the opening
of the baseplate.
There is a small metal chain on the underside of
the container. Check that it is in contact with the
base during operation, as this can dissipate
electrical charge that has built up during opera-
tion.
The fabric filter is pulled over the rigid filter so
that the fabric filter surrounds the rigid filter at
the top.
When attaching the filters to the underside of the
lid, make sure that the seal of the stiff filter sits
evenly. The gasket integrated at the top of the
filter has a flange that allows the filter to be se-
curely fastened.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 63122
Page 5
02
2022-1
Advertisement
