Download Print this page

WilTec 63122 User Manual page 3

Ash vacuum cleaner 20 l

Advertisement

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
About the product
The ash vacuum cleaner is used to remove cold, dry ash from fireplaces or barbecue trays. To
facilitate the thorough cleaning of hard-to-reach places, the vacuum cleaner is equipped with a
large container and a flexible hose. It also comes with a replaceable air filter. The product is not
intended for commercial use. The correct, reliable, and safe operation of the device depends on
its proper use.
Before working with the device, read the entire manual and follow all instructions and directions
contained therein.
No responsibility is assumed for damage or injury caused by failure to observe the safety regu-
lations and instructions in this manual.
The unit is supplied fully assembled and requires no assembly. The delivery also includes an
elastic hose as well as an aluminium suction nozzle.
Safety instructions
This device may only be used by persons with reduced physical, sensory, or mental abilities or
a lack of experience or knowledge in case a person familiar with the device and responsible for
their safety has instructed and supervises them.
Children must not use the device and should be supervised when they are near it to ensure that
they do not play with it. Cleaning and maintenance work by children should not be carried out
without supervision.
The vacuum cleaner is intended for dry operation. Sucking up water, wet ash or other wet waste
materials is prohibited. This creates a risk of electric shock, which may result in a health hazard
to the user or uninvolved persons.
Never vacuum hot, glowing or burning objects. This may cause a fire or explosion and result in
serious injury or death to the user. The maximum temperature of the impurities to be vacuumed
must not exceed 40 ℃.
The device is intended for indoor use and must not be exposed to the effects of water, including
rain.
Before connecting the power plug to the mains, make sure that the parameters of the power
supply match those on the name plate.
Before each use, check the condition of the unit, power cable, and power plug. If any defects
are found, do not operate the unit. Have any defects rectified by an appropriate specialist com-
pany.
Always disconnect the unit from the mains before carrying out maintenance work
Store the unit in a place not accessible to uninvolved persons, especially children. Even during
functional operation, make sure that the unit is stored in a place inaccessible to uninvolved
persons, especially children.
The unit must be carried by the handle, not by the power cable.
When the device is used as a blower, do not point the hose outlet at people or animals
Wear protective goggles and gloves during use.
Regularly check the condition of the hose. Do not use the device with a damaged hose.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 63122
Page 3
02
2022-1

Advertisement

loading