Table of Contents
Advertisement
11.
RELAYS
This algorithm is intended for controlling the device which will be activated together with the selected system devices.
Enter Operation modes and configure the mode of contact activation:
•
All - the contact will be enabled when all selected relays are active.
•
Any - the contact will be enabled when any of the selected relays is active.
•
None - the contact will be enabled if none of the selected relays is active.
•
Activation delay – the pre-set time after which the contact will be enabled.
•
Deactivation delay - the pre-set time after which the contact will be disabled.
12.
WEEKLY CONTROL
Weekly control algorithm enables the user to configure a schedule of contact activation. The user defines the days and
time periods during which the device connected to the contact will be operating.
1
3
2
37
6
4
5
Advertisement
Table of Contents
Need help?
Do you have a question about the EU-i-2 Plus OT and is the answer not in the manual?
Questions and answers