There is a dotted line on the edge
of the screen.
The picture is black and white.
When changing channels, the
picture freezes or is distorted or
Solutions and Explanations
If the picture size is set to
Change the cable/satellite box resolution.
If you are using an AV composite input, connect the video cable
(yellow) to the Green jack of Component Input 1 on the TV.
If the TV is connected to a cable box, try to reset the box. (Disconnect
and then reconnect the AC cord and wait until the cable box reboots.
It may take up to 20 minutes.)
Set the output resolution of the cable box to 1080i or 720p.
Fit, change it to 16:9.