❑ Troubleshooting for Anynet+
Anynet+ does not work.
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
You can connect only one receiver (home theater).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable connections.
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn't work in certain situations. (Searching channels,
If you have removed and then reconnected the HDMI cable, please
make sure to search devices again or turn your TV off and on again.
Check if the Anynet+ function of the Anynet device is set on.
is set to
Plug & Play
(initial setup), etc.)
in the Anynet+