Pre - Flight Checklist; Equipment; Regulations; Flight Conditions - Parrot ANAFI USA User Manual

P -
RE FLIGHT CHECKLIST

Equipment

Make sure you have downloaded the latest version of FreeFlight 6 and that both your
Parrot Skycontroller USA and your ANAFI USA have been updated with the latest
versions of firmware.
Make sure ANAFI USA is fitted with a microSD card with enough free memory space.
Make sure all four foldable arms of ANAFI USA are unfolded.
Make sure its propellers are clean, intact and unobstructed.
Make sure both ANAFI USA's and Parrot Skycontroller USA's batteries are fully
charged.
Make sure ANAFI USA's battery is securely installed on the drone's body.
Make sure the gimbal cap has been removed from ANAFI USA.
Make sure ANAFI USA's lenses are clean – if you need to clean them, hold the gimbal
between two fingers so that you do not pressure its mechanism when you clean the
lenses, and gently wipe the lenses with a microfiber cloth.

Regulations

Make sure the use of ANAFI US A is allowed where you are intending to fly.
Check for potential restrictions regarding the use of Wi-Fi frequencies in the area
where you are intending to fly.

Flight conditions

Check that your flying zone is safe and clear.
Do not fly AN AFI US A over urban areas or over restricted airspaces such as airports,
train stations, power plants, national reserves, and so on.
Check the weather: do not fly ANAFI USA in the fog or in a wind exceeding 15 meters
per second or 50 km/h.
Due to the operating mode of its vertical camera and ultrasound sensor, Parrot
recommends you do not fly ANAFI USA less than 10m (30 ft) over water and other
reflective surfaces (mirrors, glass, and so on).
ANAFI USA has been designed to assist first responders at a second's notice, whatever the
time, location and weather conditions. It has no inbuilt no-fly zone limitation, it can fly in the
rain and can be very useful at night. Always deploy ANAFI USA responsibly.
User Guide v6.7.7GOV – © Parrot, April 29, 2022 19