Saving Keyboard Setups To Registration Memory; To Save A Setup To Registration Memory; To Recall A Setup From Registration Memory - Casio WK210ES1A User Manual

To save a setup to registration
memory
1.
bq
Press .
2.
cs ct
Press and at the same time to enable
registration.
cs ct
• Pressing and at the same time again will disable
registration.
Bank number
3.
Configure the tone, rhythm, and other settings
you can to include in the setup.
4.
bt
Press to select the bank you want.
bt
Each press of cycles through the bank numbers.
• You also can select a bank by holding down
bs
use the (10-key) number buttons to enter a bank
number.
5.
While holding down
cn
to to select an area.
This will save the settings you configured in step 3 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
Stored in Setup 4-1
S t o r e
Lit when on
Bank 4
bt
as you
co
, press a button from

Saving Keyboard Setups to Registration Memory

To recall a setup from registration
memory
1.
bt
Press to select the bank that contains the
setup you want to recall.
2.
Use buttons
setup you want to recall.
This will recall the registration memory setup and
automatically configure the Digital Keyboard settings
accordingly.
Setup 6-1 recalled
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page E-18). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Saving registration Data on an External Device
See page E-62 for details about how to transfer registration
ck
data to a computer for storage.
■ Maintaining Data in Registration Memory
After you save data in registration memory, it will remain there
as long as power is supplied to the keyboard. However, if you
disconnect the AC adaptor when there are no batteries
loaded, data in registration memory will be deleted.
Tips for Maintaining Data
• Use both batteries and the AC adaptor together.
• Make sure that batteries with sufficient power are loaded
whenever you disconnect the AC adaptor.
• Connect the AC adaptor to the keyboard and plug it into a
power outlet before replacing batteries.
Before connecting or disconnecting the AC adaptor or
replacing batteries, first press
Bank 6
ck cn
to to select the area whose
R e c a l l
1
to turn off power.
E-49