Sampling Sounds And Playing Them On The Digital Keyboard; Connection And Preparation - Casio WK210ES1A User Manual

Sampling Sounds and Playing Them on the Digital
Keyboard
You can sample sounds from a microphone, from a portable
audio player, or other device, and then play the sound on the
keyboard or voice pads. For example, you could sample the
bark of your dog and then use the sound in a melody. You
also can sample and use passages from a CD. The sampling
feature is a great way to create new sounds that are highly
creative.

Connection and Preparation

• Before connecting, make sure that the Digital
Keyboard, external devices, and/or the microphone all
are turned off.
1.
Connect a microphone or external device to the
Digital Keyboard.
MIC IN jack
Digital Keyboard AUDIO IN jack
Stereo mini plug
• You also could connect a commercially available
microphone.
• Connection of an external device requires commercially
available connecting cords, supplied by you. Connecting
cords should have a stereo mini plug on one end and a plug
that matches the configuration of the external device on the
other end.
1 1 3 3
CD player, Cassette player,
etc.
bt bt ck ck cl cl cm cm cn cn co co
2.
Turn down the volume levels of the external
device and the Digital Keyboard.
3.
Turn on the external device or microphone, and
then turn on the Digital Keyboard.
• When using a microphone, adjust the input volume
3
level with .
• It will take a few seconds after you turn on the Digital
Keyboard before you will be able to use the microphone.
• Sampled sounds are recorded in monaural.
bq bq bp bp bs bs
cs cs ct ct
E-19